80mm 3 inch Centrifugal irrigation water pump Diesel engine/Electric/PTO drive river water pump
Our vertical agricultural diesel powered centrifugal water pumps for agriculture adopts a direct-connected structure, which has the characteristics of simple and compact structure, large flow, high efficiency, less vibration, good performance, strong sewage discharge capacity, energy saving, simple structure, convenient use and maintenance, etc., and has a broad application market. and development prospects. It is suitable for conveying clean water or other liquids with physical and chemical properties similar to clean water, and is widely used in various occasions such as farmland drainage and irrigation, industrial and urban water supply and drainage.
|vertical agricultural diesel powered centrifugal water pumps for agriculture
cast iron pump head
Thickened cast iron pump head, Corrosion resistance, long life
Cast iron pump body
Adopt cast iron pump casing, good heat dissipation effect, durable, improve the running ability of the pump
Cast iron impeller
Cast iron impeller, using advanced hydraulic design, anti-corrosion and wear-resistant, durable and long life
The main function is to transfer power, support the impeller to maintain normal operation in the working position. The shaft is equipped with bearings, axial seals and other parts.
The vertical agricultural diesel powered centrifugal water pumps for agriculture is widely used in various occasions such as farmland irrigation and drainage, industrial and urban water supply and drainage.
ZheJiang Xihu (West Lake) Dis. E Shengquan Machinery Co. Ltd. was established in 2011. With the strongly support and full reliance of our customers, with nearly 20 years’ hard work and development, with the mature professional experience, the “WHangZhou Water Pump” has developed into a CZPT brand of agricultural water pump products in North China. The main products cover all kinds of centrifugal clean water pumps, high pressure sprinkler pumps, high pressure drip irrigation pumps, mixed flow pumps, self-priming pumps, diesel pump units, gasoline pump units, motor pump units, QS series submersible pumps, polyethylene water hoses and steel plate bottom valve, which are more than 100 varieties.
In 2017, Shengquan Machinery Co., Ltd. has invested large sums of money in building a production base in HangZhou (ZHangZhoug), which is the birthplace of water pump, to expand its product line and to achieve the goal of one-stop purchase of pump products. The base is mainly responsible for the production of QDX/QX series submersible pumps, the QD/Q series multi-stage submersible pump, the QY series oil-immersed submersible pump, WQ/WQD series sewage disposal pump, WQAS series cutting sewage submersible pump, QJ/QJD series well-use multi-stage submersible pump, QGD series screw submersible pump, JET series jet pump , WZB-ZN series smart self-priming pump, QB series clean water pump, CPM series high lift centrifugal pump, DK / NF / LHF series centrifugal pump and other products. Relying on perfect quality system, advanced production technology, complete testing equipment, thereby to make the product quality and performance are at the domestic advanced level.
Looking CZPT to the future, Shengquan Machinery Co., Ltd will continue to introduce talents, advanced production technology and scientific management concepts with a new attitude, and to keep on making progress and innovation, and providing better products as well as more intimate services for our customers.
We have a professional workshop manufacturing team, every worker is strictly screened and trained, we have a complete production system, from casting workshop, machining workshop, assembly workshop, to paint workshop, 4 advanced production lines are The global sales network provides a strong backing.
We are manufacturer and direct sales, with price advantage and technical advantage. We can offer you the lowest price and best quality in the industry
We provide customized services, you can customize a product according to your needs, you can also put your own LOGO
Patent & certification
We own a number of invention patents and trademarks brands
We are Alibaba’s verified supplier, providing you with professional services and quality-assured products, so you can buy with confidence
1. who are we?
We are based in ZheJiang , China, start from 2011,sell to Domestic Market(00.00%),Africa(00.00%),South America(00.00%),Southeast Asia(00.00%),South Asia(00.00%),Mid East(00.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Centrifugal Pumps/ High Pressure Spray Irrigation Pumps/ Mixed Flow Pumps/ Self Priming Pumps/ Submersible Pump/ Diesel Pump Sets/
Gasoline Pump Sets/ Motor Pump Sets/ Diesel Engine/ Motor Engine/ Electric Generator/ Layflat Water Hose,Robber Pipe/ Suction
Pipe/ Spray Gun/ Clamp/ Foot Valves and Accessories
4. why should you buy from us not from other suppliers?
We have more than 10 years of research and development experience, the factory has a supporting plant of 20,000 square meters, all kinds of staff more than 200 people.Several modern production lines have passed 2 national system certifications.
5. what services can we provide?
Accepted Delivery Terms: null;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by CX 2023-10-25