China Cast Iron Five-Groove American Standard Pulley Sheaves with Split Taper Bushings for 5V Belts with high quality

Product Description

Cast Iron Five-Groove American Standard Pulley Sheaves With Split Taper Bushings For 5V Belts

5V series 5 groove tapered bushing pulley applies to 5V, 5VX, 5V belt, and 5VX belt. They range in diameter from 4.60 “to 50.0”. Depending on the pulley size, they use Q2, R1, S1, or U1 split tapered bushes, which we also have in stock. Most of our five-groove 5V split taper pulleys are made of high-strength grade 35 cast iron, coated with phosphate coating and anti-corrosion paint. All these are balanced at the factory to ensure the smooth operation of the machine.

Five-Groove 5V Split Taper Sheave Size Chart

Support 5V, 5VX series V belt
(1) 5V series V-belt
Classic 5V series V-belts have a top width of 0.63 “, a thickness of 0.53”, and an angle of 38 °. In addition, the 5V V-belt is 1 of the oldest V-belts in the industry. Because of their long-term success and economical operation, they are also 1 of the industry’s most widely used belt series. The high-quality 5V series v-belts we provide are manufactured according to ISO 9001 specifications. They are oil and heat-resistant and can be directly interchanged with other brands. They are composed of natural rubber compound and polyester rope, covered with a mixture of cotton and polyester, and have high durability.
(2) 5V series ribbon V-belt
The 5V series V-belts are part of the “classic” V-belt series because they are 1 of the oldest and most common belts. Our belts are manufactured according to ARPM standards and have excellent strength, durability, and performance. The top width of each 5V series v-belt (belt/rib) is 0.63 “.
(3) 5VX toothed V-belt
The top width of the 5VX toothed v-belt is 0.53 “, and the thickness is 0.53”. Our grooved 5VX v-belts are manufactured with rough sidewalls to eliminate slip, improve efficiency and save operating costs. They are also manufactured according to ARPM standards and are oil and heat-resistant. The 5VX conveyor belt comprises high-quality neoprene compound and high-strength polyester rope, and the top fabric is made of a cotton polyester blend. In addition to the performance, durability, and energy-saving advantages, our v-belts will be used with existing vertical v-pulleys/pulleys.
(4) 5VX toothed V-belt
All our v-belts are manufactured according to ARPM specifications, with excellent performance and durability. Because of its design, the belt 5VX toothed v-belt runs more smoothly is more relaxed and is generally more durable than the standard belt C v-belt. They also provide higher efficiency than ordinary v-belts, which means fewer energy costs. We can also stock pulleys/pulleys for 5VX belts. If you need more information or a quotation, please contact us, and we will be happy to help you.
Split taper bushing accessories
Split tapered bushes are 1 of the most commonly used bushes because they have high overall strength, are easy to install and unload, and have a high retention force to connect the shaft to the drive unit or idler gear assembly. Split tapered bushes are 1 of the most commonly used bushes because they have high overall strength, are easy to install and unload, and have a high retention force to connect the shaft to the drive unit or idler gear assembly. Open tapered bushes are used for various pulleys, conveyor pulleys, and sprockets. We have G series to W2 series split taper bushings and 0.375 inches to 7.438 inches and metric hole diameters.
V-belt 5V pulley
The 5V pulley is specially manufactured for 5V series V-belts and ribbon 5V belts. The size of our 5V v-belt pulley is manufactured according to ARPM standards so that it can be directly interchanged with other brands. There are only 2 types of 5V pulleys: taper lock and QD (quick disassembly), which can increase the flexibility of the aperture range. The difference between our pulleys and other pulleys on the market is that most pulleys are made of Grade 35 cast iron instead of the standard Grade 25 cast iron. This results in stronger pulleys and better wear resistance. In addition, it should be noted that these pulleys run more smoothly and have less vibration after dynamic balancing, thus extending the life of bearings and machinery. In addition, they are phosphate and paint to improve corrosion resistance.

Installation of split taper bushing
1. Make sure that the tapered surface of the bushing and the inside of the driven product are clean and free of anti-seize lubricant.
2. Place the bushing in the sprocket or other part type that accepts the bushing.
3. Place the cap screw loosely in the upper pull hole. The bushing remains loose to ensure a sliding fit on the shaft.
4. Place the key on the shaft and slide the sprocket or other part type to the desired position on the column. Make sure that the head of the cap screw is accessible.
5. Align the sprocket or part type and tighten the screws alternately and gradually until they are tightened. At this time, there should be a gap between the bushing flange and the sprocket; Make sure that the gap does not close. Do not use an extension on the wrench handle; Do not allow the sprocket or parts to contact the bushing flange.
Removal of separation cone bushing
1. Loosen and remove the cap screws.
2. Insert the cap screw into the threaded removal hole.
3. Tighten the inserted screw until the sprocket or other part type is loose on the shaft.
4. Remove the sprocket/part type from the shaft.
V-belt 5V pulley
The 5V pulley is specially manufactured for 5V series V-belts and ribbon 5V belts. Our 5V v-pulley is manufactured according to ARPM standards so that it can be exchanged with other manufacturers immediately. The 5V pulley has only a tapered lock design and a QD (quick detachable) design for the diversity of lifting holes. The difference between our pulleys and other individuals on the market is that most pulleys are made of Grade 35 cast iron as substitutes for the standard Grade 25. This makes the pulley stronger and more wear resistant. Another thing to note is that these pulleys have been dynamically balanced to achieve smoother operation and reduce vibration, thus extending the service life of bearings and machinery. In addition, it can also be phosphatized and painted to enhance corrosion resistance.

Company Information

 

 

 

Type: Agricultural
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Iron
Power Source: Electricity
Weight: 6kg
After-sales Service: Installation Guide 3-Year Warranty
Type: Agricultural
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Iron
Power Source: Electricity
Weight: 6kg
After-sales Service: Installation Guide 3-Year Warranty

define bushing
China Cast Iron Five-Groove American Standard Pulley Sheaves with Split Taper Bushings for 5V Belts     with high quality China Cast Iron Five-Groove American Standard Pulley Sheaves with Split Taper Bushings for 5V Belts     with high quality
editor by czh 2022-11-24